HS2-I-50 Lightning Current Arresters Featured Image

HS2-I-50 Lightning Current Rectors

Isicelo

Ukuhanjiswa kwe-AC / DC

Izibonelelo zamandla

Ukuzitshintsha kwemizi-mveliso

Unxibelelwano

Iinkqubo zokulawula iimoto

izicelo PLC

Izixhobo zokudlulisa amandla

izicelo zeHVAC

AC drives

Iinkqubo ze-UPS

Iinkqubo zokhuseleko

IT / Amaziko eenkcukacha

Izixhobo zonyango

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu/Iinzuzo

Ufakelo olulula okanye i-retrofit

I-Din-rail iyafakeka

Ukungaphumeleli ukhuseleko / uyilo oluzikhuselayo

IP20 uyilo olukhuselekileyo lomnwe

Ukuprintwa kweenyawo ezincinci

Ifomathi yeplagi

I-HS210-I-50 yolona luhlu olunamandla kakhulu lwe-Type 1 / I-Class I yokubanjwa kombane yangoku, ekwazi ukukhupha amandla (okwangoku) ukusuka kwisiteleka sombane esithe ngqo (10/350) kwinkqubo yokukhusela umbane wangaphandle (LPS) okanye ukunikezelwa okuphezulu, ngokuhambelana ne-EN/IEC 61643-11.DIN kaloliwe ifomathi monobloc.

■Ifanelekile njengenyathelo lokuqala lokukhusela kwiipaneli zonikezelo lwamandla angenayo kunye nakwiindawo zokubonakaliswa okuphezulu kwe-atmospheric.

■ Ikhupha imisinga yempembelelo nge-10/350 μs ifom yamaza: 50 kA ngesigaba ngasinye.

■ Izixhobo ezikhethekileyo zeTNS, TNC, TT, IT earthing systems.

■Izixhobo ezikhethekileyo ezihambelana nothungelwano loNxibelelwano lwePower Line.

■ I-Biconnect – zimbini iindidi zetheminali: yeyokuqinileyo okanye intambo ethambileyo kunye neyefolokhwe yohlobo lwe-comb busbar.

Ishiti yedatha

TypeTechnical DataNominal line voltage (Un)	HS210-I-50 230/400 V (50 / 60Hz)
Awona mandla ombane aphezulu aqhubekayo (UC) (LN)	255V
Awona mandla ombane aphezulu aqhubekayo (UC) (N-PE)	255V
SPD ukuya kwi-EN 61643-11	Uhlobo loku-1
SPD ukuya kwi-IEC 61643-11	iklasi I
Umbane wempembelelo yangoku (10/350μs) (Iimp)	50kA
Ukukhutshwa okuqhelekileyo ngoku (8/20μs) (Ku)	50kA
Inqanaba lokhuseleko lombane (Phezulu) (LN)	≤ 2.0kV
Inqanaba lokhuseleko lombane (Phezulu) (N-PE)	≤ 2.0kV
Ixesha lokuphendula (tA) (LN)	<100ns
Ixesha lokuphendula (tA) (N-PE)	<100ns
Isimo sokuSebenza / isiBonelelo seFault	no
Umgangatho wokhuseleko	IP20
Izinto ezigqumayo / udidi olunokutsha	PA66, UL94 V-0
Uluhlu lobushushu	-40ºC~+80ºC
Ukuphakama	13123 ft [4000m]
I-Conductor Cross Section (max)	35mm2 (Oluqilima) / 25mm2 (Flexible)
Abafowunelwa abakude (RC)	no
Ubume	Monoblock
Ukukhwela	DIN kaloliwe 35mm
Indawo yofakelo	ufakelo lwangaphakathi

Imilinganiselo

● Umbane kufuneka unqunyulwe phambi kofakelo, kwaye ukusebenza ephilayo akuvumelekanga ngokungqongqo
● Kunconywa ukuba udibanise i-fuse okanye i-circuit breaker ngokuzenzekelayo kwichungechunge phambi kwemodyuli yokukhusela umbane
●Xa ufaka, nceda udibanise ngokuhambelana nomzobo wofakelo.Phakathi kwazo, i-L1, i-L2, i-L3 iingcingo zesigaba, i-N intambo engathathi hlangothi, kunye ne-PE yintambo yomhlaba.Musa ukuyidibanisa ngokungalunganga.Emva kokufakela, vala i-breaker circuit breaker (fuse) ngokuzenzekelayo
● Emva kokufakela, khangela ukuba imodyuli yokukhusela umbane isebenza ngokufanelekileyo i-10350gs, uhlobo lwe-tube yokukhupha, kunye nefestile: ngexesha lokusetyenziswa, ifestile yokubonisa impazamo kufuneka ihlolwe kwaye ihlolwe rhoqo.Xa i-fault display window ibomvu (okanye i-terminal ye-remote signal yemveliso kunye ne-remote signal output alarm signal), ithetha imodyuli yokukhusela umbane Kwimeko yokungaphumeleli, kufuneka ilungiswe okanye itshintshwe ngexesha.
● Iimodyuli zokukhusela umbane ezihambelanayo kufuneka zifakwe ngokufanayo (i-Kevin wiring ingasetyenziselwa), okanye i-wiring ephindwe kabini ingasetyenziswa.Ngokubanzi, udinga kuphela ukudibanisa nayiphi na izithuba ezimbini zocingo.Ucingo lokudibanisa kufuneka luqine, luthembeke, lube lufutshane, lube lukhuni, luthe tye.

Ngaphambili: I-HS2-I-15 uMkhuseli wokuTyelwa kwamandla

Okulandelayo: Idatha yeHS2XJ kunye noKhuseleko lweSignali yokuKhusela

I-2 Pole T1 / T2 Spd